Assignment 1

Submitted by soren svejstrup on Wed, 01/30/2013 - 15:46

Description

This is a basic blinking circuit. I've added an extra loop and changed the blinking and the delay.

 

Code

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 12;
 
// the setup routine runs once when you press reset:
void setup() {                
  // initialize the digital pin as an output.
  pinMode(led, OUTPUT);     
}
 
// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);                // wait for 200/1000 of a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(200);                // wait for 200/1000 of a second
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);               // wait for a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(700);                // wait for 700/1000 of a second
}
photo_1.JPG
0
Your rating: None
Drupal theme by Kiwi Themes.