Lab 3 - 3 pots with 3 LED

Submitted by kmpark on Wed, 02/20/2013 - 03:22

 

 

Description

First I connected 1 pot to control the LEDs, and then added two more pots to control each LED. Soldering was so much fun after a couple attempts. The brightness of each LED was controlled by a pot.

Components Used

1- Arduino Uno

3- LED

1- Resistor

1- Breadboard

3- Pot

 

Code

 

// Analog pin settings
int aIn = 0;    // Potentiometers connected to analog pins 0, 1, and 2
int bIn = 1;    //   (Connect power to 5V and ground to analog ground)
int cIn = 2;  
 
// Digital pin settings
int aOut = 9;   // LEDs connected to digital pins 9, 10 and 11
int bOut = 10;  //   (Connect cathodes to digital ground)
int cOut = 11;  
 
// Values
int aVal = 0;   // Variables to store the input from the potentiometers
int bVal = 0;  
int cVal = 0;  
 
// Variables for comparing values between loops
int i = 0;            // Loop counter
int wait = (1000);    // Delay between most recent pot adjustment and output
 
int checkSum     = 0; // Aggregate pot values
int prevCheckSum = 0;
int sens         = 3; // Sensitivity theshold, to prevent small changes in 
                      // pot values from triggering false reporting
// FLAGS
int PRINT = 1; // Set to 1 to output values
int DEBUG = 1; // Set to 1 to turn on debugging output
 
void setup()
{
  pinMode(aOut, OUTPUT);   // sets the digital pins as output
  pinMode(bOut, OUTPUT);   
  pinMode(cOut, OUTPUT); 
  Serial.begin(9600);     // Open serial communication for reporting
}
 
void loop()
{
  i += 1; // Count loop
 
  aVal = analogRead(aIn) / 4;  // read input pins, convert to 0-255 scale
  bVal = analogRead(bIn) / 4; 
  cVal = analogRead(cIn) / 4;  
 
  analogWrite(aOut, aVal);    // Send new values to LEDs
  analogWrite(bOut, bVal);
  analogWrite(cOut, cVal);
 
  if (i % wait == 0)                // If enough time has passed...
  {    
    checkSum = aVal+bVal+cVal;      // ...add up the 3 values.
    if ( abs(checkSum - prevCheckSum) > sens )   // If old and new values differ 
                                                  // above sensitivity threshold
    {
      if (PRINT)                    // ...and if the PRINT flag is set...
      {
        Serial.print("A: ");        // ...then print the values.
        Serial.print(aVal);         
        Serial.print("\t"); 
        Serial.print("B: ");        
        Serial.print(bVal);
        Serial.print("\t");
        Serial.print("C: ");                
        Serial.println(cVal); 
        PRINT = 0;
      }
    }  
    else
    {
      PRINT = 1;  // Re-set the flag   
    } 
    prevCheckSum = checkSum;  // Update the values
 
    if (DEBUG)   // If we want debugging output as well...
    {
      Serial.print(checkSum);
      Serial.print("<=>");
      Serial.print(prevCheckSum);
      Serial.print("\tPrint: ");
      Serial.println(PRINT);
    }
  }
}
 
 

Images

Tried to attach them below...but there was en error, so I upload a video on youtube

Video

http://youtu.be/O-5jCq-B9tk

 

0
Your rating: None
Drupal theme by Kiwi Themes.