A1: Blinking LEDs

Posted by prayag

prayag's picture

 

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
void setup() {                
  // initialize the digital pin as an output.
  // Pin 13 has an LED connected on most Arduino boards:
  pinMode(13, OUTPUT);     
}
 
void loop() {
  digitalWrite(13, HIGH);   // set the LED on
  delay(5000);              // wait for a second
  digitalWrite(13, LOW);    // set the LED off
  delay(5000);              // wait for a second
}
BlinkingLEDs.jpg
0
Your rating: None