Here's the code i made/adapted, after soldering the pots, and connecting to analog.
/** one pot dims, the other pot changes the blinking rate* modification of the following* http://www.arduino.cc/en/Tutorial/AnalogInput*/int pot1Pin = 0; // select the input pin for the potentiometer 1int pot2Pin = 1; // select the input pin for the potentiometer 2int pot3Pin = 2; // select the input pin for the potentiometer 2int pot1Val = 0; // variable to store the value coming from pot 1int pot2Val = 0; // variable to store the value coming from pot 2int pot3Val = 0; // variable to store the value coming from pot 2int led1Pin = 9; // select the pin for the LED 1int led2Pin = 11; // select the pin for the LED 2int led3Pin = 10; // select the pin for the LED 3void setup() {pinMode(led1Pin, OUTPUT); // declare the led1Pin as an OUTPUTpinMode(led2Pin, OUTPUT); // declare the led2Pin as an OUTPUTpinMode(led3Pin, OUTPUT); // declare the led2Pin as an OUTPUT}void loop() {pot1Val = analogRead(pot1Pin); // read the value from pot 1, between 0 - 1024, for dimmingpot2Val = analogRead(pot2Pin); // read the value from pot 2, between 0 - 1024, for blinkingpot3Val = analogRead(pot3Pin); // read the value from pot 3, between 0 - 1024, for SOMETHING?analogWrite(led2Pin, pot1Val/4); // dim LED to value from pot1delay(pot2Val); // stop the program for some time, meaning, LED is on for this timeanalogWrite(led2Pin, 0); // dim LED to completely dark (zero)delay(pot2Val); // stop the program for some time, meaning, LED is OFF for this time}